ScaFixScaffold system
HAKI Universal in ScaFix
ScaFix plans HAKI Universal scaffolding with the system's own bay lengths (3.05 m and 2.5 m) and depth (1.66 m, 1.25 m, 1.01 m, 0.77 m, 0.7 m), draws the scaffold in 3D and works out the parts list. Below is our example house with HAKI Universal.
The system in ScaFix
- Manufacturer
- HAKI
- System type
- Modular scaffold with wedge connections
- Variants in the system picker
- HAKI Universal (3.05m), HAKI Universal (2.5m), HAKI Universal (2.5m + 3.05m)
- Bay lengths
- 3.05 m, 2.5 m
- Depths
- 1.66 m, 1.25 m, 1.01 m, 0.77 m, 0.7 m
- Source of the tie rule
- HAKI Monteringsveiledning HAKI Universal (NO) © HAKI AS 2022 10 Rev 5 (P000073) s. 30
Close-ups from the 3D model
The example house with HAKI Universal
ScaFix's own example: a 11.4 m × 5.3 m house with a gabled roof, eaves 4.5 m and ridge 6 m, scaffolded all round. The numbers below are the app's own, worked out by the same engine as in projects.
- System
- HAKI Universal
- Scaffold depth
- 1.01 m
- Decks at
- 2.5 m, 4.5 m
- Top deck
- 4.5 m
- Access
- Stair tower
- Parts in all
- 650
The walls and the bays
| Wall | Length | Height | Bays |
|---|---|---|---|
| Wall 1 | 11.4 m | 4.5 m | 5 × 2.5 m |
| Wall 2 (gable) | 5.3 m | 6 m | 3 × 2.5 m |
| Wall 3 | 11.4 m | 4.5 m | 5 × 2.5 m |
| Wall 4 (gable) | 5.3 m | 6 m | 3 × 2.5 m |
The parts list for the example house with HAKI Universal
The whole parts list for ScaFix's own example, grouped the way the app shows it.
| Part | Length | Count |
|---|---|---|
| Frames and standards | ||
| Standards | 2 m | 80 |
| Standards | 1 m | 40 |
| Ledgers and beams | ||
| Ledgers | 2.5 m | 96 |
| Transoms | 60 | |
| Guardrails | ||
| Front guardrails | 2.5 m | 32 |
| Toeboards | ||
| Toeboards | 2.5 m | 32 |
| Diagonals | ||
| Diagonals | 2.5 m | 8 |
| Ends | ||
| End guardrails | 18 | |
| Wall ties and fittings | ||
| Wall ties | 26 | |
| Wall-anchor fittings | 26 | |
| Right-angle couplers for wall ties | 6 | |
| Base jacks and legs | ||
| Base jacks / legs | 40 | |
| Stair tower | ||
| UTV stairs | 2 | |
| Stair-tower standards | 4 | |
| Stair-tower ledgers | 1 | |
| Stair-tower transoms | 6 | |
| Stair-tower base jacks | 2 | |
| Interior UTV handrails | 2 | |
| Exterior UTV handrails | 2 | |
| 700 mm guardrail frames | 2 | |
| 700 mm toeboards | 2 | |
| Stair-tower top frame | 1 | |
| Top guardrail post | 1 | |
| Top-exit toeboard | 1 | |
| System-specific parts | ||
| Aluminium planks | 2.5 m | 160 |
This is our example. The parts list for your own walls follows your measurements and settings.
Limits
- The number of wall ties follows the system's tie rule. Their positions must be checked against the manufacturer's assembly instructions.
- Round corners, silo and tank scaffolding and hanging scaffolds are not supported yet.
Questions and answers
Which bay lengths does HAKI Universal have in ScaFix?
ScaFix uses the bay lengths 3.05 m and 2.5 m and the depth 1.66 m, 1.25 m, 1.01 m, 0.77 m, 0.7 m for HAKI Universal. The variants in the system picker are HAKI Universal (3.05m), HAKI Universal (2.5m), HAKI Universal (2.5m + 3.05m).
How many parts does the example house need with HAKI Universal?
With HAKI Universal, the 11.4 m × 5.3 m example house needs 650 parts in all, split into the groups in the table. Your own building gets its own parts list.
Is the HAKI Universal plan from ScaFix approved for erection?
ScaFix is a planning tool, not a structural calculation or approval. Always check the scaffold against the manufacturer's assembly instructions and the rules that apply before you erect it.