Manufacturer

JUMBO scaffold systems

The JUMBO systems you can plan in ScaFix, with the numbers the planning engine uses for each one: type, bay lengths, depths and the approval or manual its wall-tie rule cites.

By Ole Emil Frikstad Urstad · How the numbers are computed · Last updated 25 October 2026

JUMBO around the example house, as ScaFix draws it in 3D.

Which JUMBO scaffold systems can ScaFix plan?

ScaFix models 2 JUMBO scaffold systems: JUMBO and JUMBO System. They cover frame scaffolding and ringlock (rosette) scaffolding, with bay lengths from 0.73 m to 3.07 m. Each is planned on your own walls by the same engine as the app.

JUMBO at a glance

Based in: Kolding, Denmark
Systems in ScaFix: 2
Types: Frame, Ringlock (rosette)
Website: jumbo.as

JUMBO systems in ScaFix

The bay lengths and depths are every size the catalogue offers for the system, across its variants. «Approval» is the number the system’s tie rule cites; «–» means the rule cites a manual or no document.
System	Type	Bay lengths	Depths	Approval
JUMBO	Frame	3 m, 2.5 m, 2 m	0.73 m	–
JUMBO System	Ringlock (rosette)	3.07 m, 2.57 m, 2.07 m, 1.57 m, 1.4 m, 1.09 m, 1.04 m, 0.73 m	1.4 m, 1.09 m, 0.73 m	–

JUMBO systems on the same example house

Each system planned on ScaFix’s example house (11.4 m × 5.3 m) with the default settings. The totals differ with bay length, depth and part design; a lower total is not better by itself. How the example is set up is on the methodology page.
System	Long-wall bays	Depth	Parts in total
JUMBO	5	0.73 m	348
JUMBO System	5	0.73 m	541

The PDF import in ScaFix: a 1:100 floor plan with the detected outline and wall lengths marked, and the steps Page, Scale, Walls, Heights and Review — The PDF import: the scale is found and the outline sits on the drawing's walls (test drawing).

Sources

Tie rule for JUMBO: JUMBO Facadestillads flex 2 mm monteringsvejledning §4.7.2. No manufacturer document for the tie rule of JUMBO System is on file in ScaFix; check the manufacturer’s assembly instructions. ScaFix is a planning tool, not a structural approval.

jumbo.as/wp-content/uploads/2020/08/Vejl_facade_4mm.pdf

Questions and answers

How many JUMBO systems does ScaFix have?

2: JUMBO and JUMBO System. The length variants of one system count once.

Which bay lengths do JUMBO systems use in ScaFix?

JUMBO: 3 m, 2.5 m, 2 m; JUMBO System: 3.07 m, 2.57 m, 2.07 m, 1.57 m, 1.4 m, 1.09 m, 1.04 m, 0.73 m.

Is ScaFix made by JUMBO?

No. ScaFix is independent planning software by Ole Emil Frikstad Urstad; it is not made, sold or endorsed by JUMBO. The bay lengths, depths and tie rules come from the documents cited on this page. ScaFix is a planning aid, not a structural approval.

Try one week – €0.98 See the demo house in 3D See ScaFix

First week €0.98, then €9.98/week. Full Pro. Cancel anytime.